![Sugar & starch industry](uploads/media/keyvisual_zucker_1217_02.png)
Sugar & starch industry
Palm sugar
Palm sugar
![Palm sugar - Image 1 Palm sugar - Image 1](typo3temp/GB/48_Palmzucker_02_61504abac0_77a16cefdf.jpg)
A major sugar producer in Thailand sought a solution for packaging palm sugar. The customer opted for a solution with a Börger Rotary Lobe Pump.
Palm sugar is made from the sap of the inflorescence of palms. The sugary nectar from palms is extracted from mature inflorescence by slitting them and collecting the nectar in tanks. Once the pieces and solids have been filtered out, the palm juice is boiled and thickened into a syrup. This is heated again until crystallization takes place. The hot palm sugar syrup is passed into a hopper in and then stirred. The Boerger Rotary Lobe Pump is installed below the hopper and keeps the palm sugar syrup circulating. The speed of the pump is controlled by a frequency converter. The hot syrup is poured into 1 kg bags using a valve. It then cools down and solidifies in the bags.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Palm syrup |
Viscosity | 20,000 - 30,000 mPas |
Temperature | 50 - 80 °C (122 - 176 °F) |
Rated capacity | 0,8 m³/h (3.52 usgpm) |
Speed | 60 rpm |
Raw sugar process
Raw sugar process
![Raw sugar process - Image 1 Raw sugar process - Image 1](typo3temp/GB/50_RZ_Ablauf_02_05c2af69b7_8ab58a0e22.jpg)
A major German sugar producer required a pump to convey the raw sugar syrup at its plant. In the crystallization production sequence, the water is extracted from the sugar beet syrup in a vaporization crystallizer. Sugar crystals are formed in the process with the help of seed crystals. The resulting mass is a mixture of 50% sugar crystals and viscous syrup. Once cooled down, the sugar crystals separate from the viscous white sugar syrup in a centrifuge. After spinning, the white sugar syrup goes to a boiling station again for crystallization. The resulting syrup separated from the sugar crystals is called raw sugar syrup and is pumped to the post-product station.
The customer opted for a Boerger Rotary Lobe Pump for this purpose. The pump's ease of maintenance and the sophisticated seal construction particularly impressed the customer.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Unrefined sugar |
Temperature | 50 - 75 °C (122 - 167 °F) |
Viscosity | max. 2,000 mPas |
Rated capacity | 1,0 - 5,5 m³/h (4.4 - 24.2 usgpm/h) |
Pressure | 4 - 6 bar (58 - 87 psi) |
Syrup
Sugar beet syrup
![Sugar beet syrup - Image 1 Sugar beet syrup - Image 1](typo3temp/GB/51_Dicksaft_02_ce0648fdef_3a6baff67d.jpg)
Bioethanol refers to ethanol made exclusively from biomass or biodegradable portions of waste, for use as biofuel. Bioethanol can be made from any raw material that contains sugar or starch. It is often obtained from sugar beet syrup. The sugar beet syrup is made in a sugar factory.
A major ethanol manufacturer required a pump for unloading the tankers which delivered sugar beet syrup. The pump had to be able to convey the highly viscous syrup, be self-priming and pressure resistant up to 8 bar.
The ethanol manufacturer chose a Börger Rotary Lobe Pump.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Raw juice |
Viscosity | 500 - 1,500 mPas |
Rated capacity | 50 m³/h (220 usgpm) |
Pressure | 8 bar (116 psi) |
Binders
Binder
![Binder - Image 1 Binder - Image 1](typo3temp/GB/52_Fuellmasse_02_eb92446c31_94e85b380d.jpg)
A sugar producer was looking for a pump for conveying binder. The customer decided on a Börger Rotary Lobe Pump. Besides the low price and the resistance to sugar crystals, the key to this decision was the Boerger Rotary Lobe Pump's ease of maintenance.
The Rotary Lobe Pump is operated at speeds of up to 100 rpm due to the high viscosity of the binder. Due to the abrasive ingredients of the medium, the pump was equipped with replaceable casing liners and Premium stainless steel rotors. Maintenance of the pumps can be performed by in-house personnel on site at the sugar producer's by simply undoing a few screws. (MIP = Maintenance in Place)
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Binders |
Viscosity | 70,000 mPas |
Rated capacity | 40 m³/h (176 usgpm) |
Pressure | 8 bar (116 psi) |
Sugar solution
Sugar solution
![Sugar solution - Image 1 Sugar solution - Image 1](typo3temp/GB/53_Klaere_0119_02_a186d046ba_b5807e206e.jpg)
A sugar producer needed a pump for conveying sugar solution. After the thin juice extracted from the sugar beet has been cleaned and run through the vaporization station it is called syrup.
Remaining water is extracted from the syrup in the boiling station at reduced pressure. Once a certain sugar concentration has been achieved, fine sugar crystals are added to the viscous juice using seed crystals. The seed crystals grow to the required size with further water extraction. The crystallization process is then complete and the crystals are left to cool down. They are then separated from the viscous syrup by spinning in centrifuges. The crystals are caught in a filter while the syrup flows through. To produce refined sugar (especially pure high-quality sugar), the crystallized sugar is dissolved. This is then called sugar solution. Refined table sugar is made by crystallizing this solution once again. It was important for the sugar producer that the pump be sufficiently robust for this process and that maintenance could be performed on site by in-house personnel without time consuming dismantling. The customer opted for a Boerger Rotary Lobe Pump.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Sugar solution |
Temperature | 90 - 92 °C (194 - 198 °F) |
Rated capacity | 20 - 40 m³/h (88 - 176 usgpm) |
Pressure | 2 - 5 bar (29 - 73 psi) |
Lime milk
Lime milk
![Lime milk - Image 1 Lime milk - Image 1](typo3temp/GB/54_Kalkmilch_02_592c3b13f5_11cee2a8b3.jpg)
In the sugar manufacturing process, raw juice is extracted from sugar beet or cane. After extraction, the raw juice still contains various organic and non-organic substances which would interefere with the following production steps. These non-sugar substances must then be removed.
Lime and carbon dioxide are obtained by burning limestone in lime kilns. The lime is then added to the raw juice in the form of lime milk so that suspended matter flocculates and the unwanted non-sugar substances coagulate.
A French sugar manufacturer has been using a Boerger Rotary Lobe Pump for conveying lime milk now for the past 9 years. They are particularly impressed with the reliability and the long service life of Boerger pumps.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Lime milk |
Rated capacity | 30 m³/h (132 usgpm/h) |
Pressure | 3 bar (44 psi) |
Molasses
Molasses
![Molasses - Image 1 Molasses - Image 1](typo3temp/GB/55_Melasse_02_d76a353bbf_5351b2f6de.jpg)
A customer produces alcohol made by extracting ethanol and methanol from molasses (a bi-product from the sugar production). The molasses is stored in tanks. A new pump was needed to transfer the daily quantity required for production into a day tank from the storage tank.
The pump had to be able to convey viscous media as well as be robust in design and easy to maintain. The customer was also looking for a solution for regulating excess pressure as they experienced problems with the previous pressure relief valve installed. The sugar medium accumulated and hardened in the opening of the valve.
The producer of potable alcohol decided on a Börger Rotary Lobe Pump with a Boerger Variocap as overpressure protection. The force produced by the pumping pressure acts on the Variocap. As long as the spring force is greater than the pressure, the plate stays in the sealed position flush to the pump chamber. If the pressure rises above the set spring force, the plate moves axially and allows the pumped medium to flow back. When the pressure subsides, the vaiocap plate.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Molasses |
Viscosity | 70,000 mPas |
Rated capacity | 48 m³/h (211 usgpm) |
Starch
Starch
![Starch - Image 1 Starch - Image 1](typo3temp/GB/75_Speisestaerke_02_7b08c15d47_8338272526.jpg)
An international company develops and manufactures a wide range of primary products and ready-made products for the food and animal food industry, paper industry, bio-industry and pharmaceuticals industry. The focus of this family-run business is processing starch products.
The French manufacturer uses a Boerger Rotary Lobe Pump for pumping starch. Starch is highly viscous and puts heavy demands on the material and seals of the pump. The Boerger Rotary Lobe Pump is made of stainless steel and has a pressurized intermediate chamber. This makes the Boerger Rotary Lobe Pump permanently technically sealed. The gap of the lobe tip has also been increased by 1.0 mm. The customer is highly satisfied with the stable performance and the wear-resistant parts of the Boerger pump. In the event of wear on the rotor, only the detachable stainless steel tips need to be replaced.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Starch |
Viscosity | max. 30,000 mPas |
Pressure | 6 bar (87 psi) |
Magma
Magma
![Magma - Image 1 Magma - Image 1](typo3temp/GB/76_Magma_02_9ca262364e_ffc7e98bfe.jpg)
A sugar producer was looking for a reliable pump which could cope with the high viscosity and abrasiveness of magma. The producer decided on a Börger Rotary Lobe Pump.
The magma hardens if it does not keep flowing. To protect and keep the the seals clean in the Boerger Rotary Lobe Pump, a rinsing unit was integrated in the pump which rinsed the seals when in standstill to prevent the build-up of magma on the sliding surface. The Börger Rotary Lobe Pump is fitted with linear stainless steel rotors. These are resistant against the sugar crystals which occur in the magma and ensure a long service of the rotary lobe pump.
The customer is highly satisfied with the Börger Rotary Lobe Pump and has since ordered more pumps from Börger.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Magma |
Viscosity | max. 15,500 mPas |
Temperature | 60 - 70°C (140 - 158 °F) |
Rated capacity | 30 m³/h (132 usgpm) |
Pressure | 4,5 bar (65 psi) |
Crystal slurry
Crystal slurry
An international manufacturer of starch and starch derivatives was searching for a reliable pump to transfer crystal slurry. The food manufacturer's main priority was to have a smooth production process as any disruptions would lead to huge expense.
The manufacturer had several different pumps installed for transferring the crystal slurry. All of the pumps installed had suffered serious problems dealing with the pumped medium. The crystal slurry hardens quickly and is highly viscous with a solids content of up to 75% DS. The previous pumps had sealing faults, as the medium coagulated on the sealing surfaces of the mechanical seal and dried there.
Now the customer is using a Boerger Protect Rotary Lobe Pump. The Boerger Protect is equipped with double-acting mechanical seals. A Boerger thermosyphon system ensures the pressure for the mechanical seal. This prevents the medium from accumulating on the sliding surfaces of the mechanical seal. The Protect model is fitted with a heated cover to ensure the medium does not cool down inside the pump.
The customer is extremely satisfied with the Boerger Protect Rotary Lobe Pump. Production downtime due to faulty mechanical seals is a now a thing of the past. Any maintenance work can also be performed very quickly due to the Boerger pump ease of maintenance design (MIP = Maintenance in Place). Plant productivity also improved.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Crystal slurry |
Viscosity | 500 - 1,500 mPas |
Solid content | 70 - 75 % DS |
Pressure | 3 - 6 bar (44 - 87 psi) |
Wheat starch
Wheat starch
![Wheat starch - Image 1 Wheat starch - Image 1](typo3temp/GB/Weizenstaerke_170_01_ca7cee643_74bd274478.jpg)
A global company producing wheat flour, wheat starch and wheat gluten for food, pet food and non-food industries uses a Börger BLUEline Protect rotary lobe pump for conveying C solution.
The pump made of stainless steel is equipped with a double-acting mechanical seal which is pressurized with 5 bar. This way, the pumped medium cannot come into contact with the sealing surfaces of the mechanical seal.
The pump is cleaned by means of a CIP process before each standstill. In this process, the pump conveys the cleaning liquid which has a temperature of 85°C.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Wheat starch |
Viscosity | 500 mPas |
Temperature | 35 - 40°C |
Rated capacity | 20 m³/h |
Speed | 220 - 320 rpm |
Pressure | 3 - 4 bar |
C starch
C starch
![C starch - Image 1 C starch - Image 1](typo3temp/GB/C-Staerke_191_01_afb727d77c_cc3e090722.jpg)
A large wheat mill uses a Börger ONIXline rotary lobe pump for conveying very abrasive C starch. C starch is produced when wheat starch is separated from the wheat gluten. When a specified fill level has been reached, the C starch is conveyed from an underflow tank into the product tank. The rotary lobe pump operates 24 hours on 7 days a week for 365 days a year. The speed and, thus, the flow rate are regulated by means of control technology. The pump is equipped with Börger double-acting mechanical seals as cartridge versions. The seals are pressurized by a barrier pressure system. This prevents any pumped medium from penetrating between the sliding surfaces of the seals. The pump has operated without interruptions since its installation.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | C starch |
Viscosity | up to 5.000 mPas |
Temperature | 10 - 50°C |
Rated capacity | 30 - 35 m³/h |
Pressure | 2 - 4 bar |
Isomaltulose
Isomaltulose
![Isomaltulose - Image 1 Isomaltulose - Image 1](typo3temp/GB/Isomaltulose_DPLProspekt_06_d7_03b2b46224.jpg)
In a company which produces liquid sugar , Boerger Select pumps are used for conveying isomaltulose. The medium subjects the pump seals to a high degree of wear. The very fine crystals in the medium led the customer to chose a pressurized Boerger Select pump.
Technical data
Börger | Rotary Lobe Pump |
---|---|
Medium | Isomaltulose |
Rated capacity | 2 - 8 m³/h (8.8 - 35.2 usgpm/h) |
Pressure | 2 - 3 bar (29 - 44 psi) |