Mobile Pumps


mountings

By means of the standardized three-point mounting, the pump can be transported to the installation site attached at the front or rear of a Unimog or a tractor. The pump is driven by means of the PTO shaft of the vehicle.

Pumps with flow rates of up to 15,000 l/min can be used for this mobile version.

Photos

Even suitable for rough terrain

The Börger PTO shaft pump can be handled very easily. After the PTO shaft and hoses have been connected, the pump is immediately ready for use and conveys absolutely independently from the power supply.

The pump speed and flow rate can be simply and appropriately regulated via the speed of the PTO shaft.

Mobile rotary lobe pumps in this design are often used as liquid manure or flood pumps.

Options

Manufactured according to your needs

Each mobile pump is built in line with your wishes and requirements. Please find a small selection of options here.

Drive
Suction and pressure connections
Control technology
Accessories

Options

The drive

The three-point hitch frame pump is usually driven via the PTO shaft of a tractor. The mobile pump can be equipped with an additional electric motor upon request. This means that the right drive option can be selected for each application site.

Options

Suction and pressure connections

The number of suction and pressure connections is freely selectable.

      Options

      Control technology

      The pump can be equipped with control technology "Made by Börger" upon request.

            Options

            Accessories

            Each mobile pump is designed and manufactured individually.

            This allows for the integration of accessories such as a toolbox or a large stone trap in the unit.

                  Benefits

                  High pump performance without an integrated drive

                  The pump on a three-point mounting is highly flexible to use. An integrated drive is not required for this powerful pump. The rotary lobe pump is simply attached to the PTO shaft of a vehicle.

                  A selection

                  • Easy to transport: The pump can simply be attached to the three-point mounting of a vehicle and transported to the application site.
                  • Suitable for any terrain: Sufficient ground and off-road clearance is also provided to be able to drive through flooded or difficult terrain.
                  • Ready for use right away: The Pumps are ready for use straight away − connect the hoses and start the drive.
                  • Compact and powerful: Despite their compact size, the pumps are very powerful.
                  • Customized: Each pump is configured and built individually.
                  • User friendly: The pumps are very easy to operate.
                  • Very easy to maintain due to MIP (Maintenance in Place): The pump can be maintained within a few minutes at any given location.