The control cabinet made of stainless steel can be installed
at one of the two long sides or the back of the frame. Börger
control technology is programmed for the specific application and
thus ensures an optimum load of the separator at all times.
Depending on the Bioselect used, the suitable pump size of
the BLUEline PL series will be selected. The rotary lobe pump is
equipped with a directly flanged bevel gear drive.
The connector at the suction side can be supplied optionally facing
the motor or the pump cover.
Upon request, a 3-way valve is installed at the pressure side
allowing the pump to be used for transfer operations.
THE MACERATING TECHNOLOGY
A Multichopper P300 can be attached to the Bioselect frame.
The connector of the perforated disk macerator can be rotated by
360°.
Depending on the Bioselect used, the suitable pump size of
the BLUEline PL series will be selected. The rotary lobe pump is
equipped with a directly flanged bevel gear drive.
The connector at the suction side can be supplied optionally facing
the motor or the pump cover.
Upon request, a 3-way valve is installed at the suction side
allowing the liquid phase to drain without being hindered.
Upon request, a cut to size resin-coated plywood board can
be mounted to the frame. The board protects the frame from
being contaminated by the conical pile.