Bioselect - Powerframe
1
3b
5
3a
8
6
2
THE SEPARATOR
Bioselect RC 25 (max. capacity: 25 m³/h)
1
THE FRAME
2
2
3a
2
3a
4
+
+
+
THE CONTROL TECHNOLOGY
The control cabinet can be installed at one of the two long
sides of the frame. Börger control technology is programmed for
the specific application and thus ensures an optimum load of the
separator at all times.
THE FEED PUMP AND THE LIQUID PHASE PUMP
Two BLUEline rotary lobe pumps of the AN series are applied
as feed and liquid phase pumps. Both pumps are driven by one
motor.
The arrangement of the pumps on the Powerframe is flexible and
can be adjusted to our customer’s requests.
Upon request, we supply the Powerframe with only one pump.
THE MACERATING TECHNOLOGY
A Multichopper P150 can be attached to the Bioselect frame.
7
4
RIGID OR EXTENDABLE
THE POWERFRAME VERSIONS
The Bioselect RC 25 is available with different
frame versions, which are configured for you using
a modular principle. We produce the unit exactly
tailored to your needs – from the frame and the
pump and macerating technology right up to the
control technology.
Discharge height: 2.75 m
Transportation height: 2.20 m
Weight: 1.3 t
Discharge height: 2.75 m
Transportation height: 2.20 m
Weight: 1.4 t
Discharge height: 3,20 m
Weight: approx. 1,25 t
6
7
THE SAFETY DEVICE
Upon request, a cut to size resin-coated plywood board can
be mounted to the frame. The board protects the frame from
being contaminated by the conical pile.
5
8
1
3b
+
Version 1: rigid frame
Version 2: extendable Powerframe
Version 3: extendable Powerframe with 3-point hitch frame
on the
right
on the
left
P12_0720
UNLIMITED POSSIBILITIES
FURTHER SET-UP OPTIONS
Börger GmbH | D-46325 Borken-Weseke | Phone +49 2862 9103-0 | info@boerger.de | www.boerger.de
BASE FRAME WITH FEED PUMP
Abwurfhöhe: 1,80 m
BASE FRAME WITH FEED PUMP
AND MULTICHOPPER
Abwurfhöhe: 1,80 m
BASE FRAME WITH FEED PUMP
AND LIQUID PHASE PUMP
Abwurfhöhe: 1,80 m
BIOSELECT ON A WALL BRACKET
Abwurfhöhe: abhängig von der Mauerhöhe