Portable hazardous material transfer pump - according to DIN 14427
COMPACT AND POWERFUL
HAZARDOUS MATERIAL TRANSFER PUMP
Börger has developed a portable hazardous material transfer
pump (HMTP), especially for use in areas that are difficult to
access. The solids-resistant pump is manufactured according
to DIN 14427.
USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
The ATEX-compliant rotary lobe pump is equipped with an explosion-proof electric
motor and can e.g. be operated by the power generator of an emergency vehicle. The
pump is self-priming. Additional priming aids are not necessary.
The Börger rotary lobe pump also pumps in slurp operation and is suitable for cleaning
up residual liquids or removing oil or similar substances from water surfaces.
The portable pump is built in such a compact way that the pump including the drive can
be transported in the storage compartment of an emergency vehicle, on a truck bed or
in a car trunk. You can choose between two sizes. With FKM rotors installed, the
Börger HMTP conveys up to 230 l/min or 350 l/min, respectively.
Rotors made e.g. of
• FKM (Viton)
• PFA
• Stainless steel
•
Hastelloy
Casing protection made e.g. of
• Stainless steel 1.4409
• Duplex stainless steel 1.4517
• Hastelloy
CUSTOMIZED
Each Börger pump is configured and built for the specific application using a modular
principle. As a result, the pump can convey liquids of virtually any type and reaches a
very long service life.
O-rings made e.g. of
• FKM (Viton)
• FFKM (Chemraz)
Pump casing made e.g. of
• Stainless steel 1.4409
• Duplex stainless steal 1.4517
• Hastelloy
RELIABILITY DOWN TO THE LAST DETAIL
Space-saving storing in a storage
compartment of the emergency vehicle
Portable thanks to its compact lightweight
design – use in areas which are difficult to
VERSATILE USE
The HMTP has been manufactured for the transfer of aggressive
media, mineral oil products and flammable liquids of explosion
group II A and II B and temperature classes T1 to T3 in potentially
explosive atmospheres of zone 1.
The pump has a wide range of applications:
• Oil spill response pump
• Disaster relief pump
• Hazardous material pump
• Cleaning up and transferring
• Conveying of aggressive or highly viscous liquids or
• media containing solids
• Conveying of flammable liquids
• and so on
AT A GLANCE
+ Resistant to solids,
short-term dry-run capability
+ Almost pulsation-free pumping
+ Self-priming up to 7 m liquid column
+ No age-related wear of the pumping elements
+ Constant flow rate even at
high pressures
+ ATEX-compliant design
+ Pumping in slurp operation
+ Easy to operate
Tanker truck coupling (TW) DN 50 at
suction and pressure side
LOW-ON-SPACE DESIGN
The pump is installed on a stainless steel frame. The dimensions
and weight correspond to DIN 14427.
Easy to operate by means of ATEX-
compliant circuit breaker
Power supply via an explosion-proof
connector
Pressure monitoring at suction and pressure
side and temperature measurement in the
pump chamber
Weight: 95 kg
