Tanker Truck Pumps

P20_11_2021
Börger GmbH | Benningsweg 24 | 46325 Borken-Weseke | Tel: +49 2862 9103-0 | info@boerger.com | www.boerger.com
TANKER
TRUCK PUMPS
CLEVERLY DESIGNED DOWN
TO THE VERY LAST DETAIL
THE BÖRGER TANKER TRUCK PUMP
You can find Börger rotary lobe pumps on many tanker trucks
The high quality, the compact and low-on-space design and the
option of reversing the pump are the reason why the Börger pump
is the ideal tanker truck pump.
ROTOR VARIETY
Large selection of high-quality rotors for almost
pulsation-free pumping of the medium. Just the
removable lobe tips of the patented "Unique” rotor
have to be replaced in case of wear.
FILLING AND DRAINING
THROUGH ONE PIPELINE
Börger rotary lobe pumps are reversible,
they can convey medium in both directions.
This allows for a space- and weight-saving
pipeline design.
With the wide range of 25 pump sizes, a large selection of equipment and additional
parts, Börger is able to build rotary lobe pumps which are perfectly suited for every
single tanker truck. Liquid as well as viscous or abrasive pumped media can be
conveyed easily. Even solids and chemically aggressive media do not pose a problem.
Rotors made of different materials, pump casings made of grey cast iron, steel,
stainless steel or aluminium and mechanical seals made of many different material
combinations only give an idea of the Börger variety of materials.
CANTILEVERED DESIGN
FOR MAXIMUM EASE OF
MAINTENANCE
Our rotary lobe pumps feature a canti-
levered shaft design. This way, all wear
parts can be replaced very easily through
the quick-release cover – for extremely
short downtimes.
MIP
®
is an unrivaled concept which reduces
maintenance times and downtimes.
ROBUST BLOCK DESIGN
All 25 pump sizes feature dedicated,
non-segmented pump casings and
rotors in single-piece construction.
This block design makes the pumps
more robust and durable and ensures
a virtually unlimited service life.
RESISTANT
TO SOLIDS
The pump is resistant to solids.
Conveying sludges or media containing
sand is no problem.
EXTENDED SERVICE LIFE DUE
TO CASING PROTECTION
The casing protection plates and liners protect the pump
casing from wear caused by solids (e.g. sand or stones)
and can be replaced in a matter of minutes. The casing
protection is available in different materials.
INTERMEDIATE CHAMBER
AND SHAFT SEALS
The oil in the large-volume intermediate
chamber cools and lubricates the seals
and ensures the highest degree of safety.
The ideal mechanical seal is selected de-
pending on the medium.
Our single-acting mechanical seals ensure
the highest degree of safety. For challenging
applications, individual shaft seal solutions
are used.
FURTHER ADVANTAGES
+ Self-priming
+ Reversible pumping
+ Short-term dry-run capability
+ Compact design with minimum space requirements
+ 25 pump sizes with flow rates
of up to 1,440 m³/h
+ Quick filling and emptying
+ ATEX-compliant design upon request
+ Chemically resistant
DRIVEN BY A PTO SHAFT 2-speed manual gearbox
Pump types
[ selection ]
Stage
I [ 1.28:1 ]
II [ 2.30:1 ]
Flow rate
[ PTO shaft 540 rpm ]
Flow rate
[ PTO shaft 750 rpm ]
Flow rate
[ PTO shaft 1000 rpm ]
rpm [ pump ] [ l / min ] rpm [ pump ] [ l / min ] rpm [ pump ] [ l / min ]
FL 776
Discharging I 420 3,610 590 5,070 - -
Discharging II 230 1,980 330 2,840 430 3,700
FL 1036
Discharging I 420 4,790 590 6,730 - -
Discharging II 230 2,620 330 3,760 430 4,900
EL 1550
Discharging I 420 6,510 590 9,150 - -
Discharging II 230 3,570 330 5,120 430 6,670
EL 2250
Discharging I 420 9,450 590 13,280 - -
Discharging II 230 5,180 330 7,430 430 9,680
Pump types
[ selection ]
Stage
I [ 3.21 : 1 ]
II [ 2,27 : 1 ]
III [ 1,60 : 1 ]
Flow rate
[ PTO shaft 540 rpm ]
Flow rate
[ PTO shaft 750 rpm ]
Flow rate
[ PTO shaft 1000 rpm ]
rpm [ pump ] [ l / min ] rpm [ pump ] [ l / min ] rpm [ pump ] [ l / min ]
FL 776
Discharging I 170 1,460 230 1,980 310 2,670
Discharging II 240 2,060 330 2,840 440 3,780
Discharging III 340 2,920 470 4,040 *630 5,420
Filling 410 3,530 570 4,900 *760 6,540
FL 1036
Discharging I 170 1,940 230 2,620 310 3,530
Discharging II 240 2,740 330 3,760 440 5,020
Discharging III 340 3,880 470 5,360 *630 7,180
Filling 410 4,670 570 6,500 *760 8,660
EL 1550
Discharging I 170 2,640 230 3,570 310 4,810
Discharging II 240 3,720 330 5,120 440 6,820
Discharging III 340 5,270 470 7,290 *630 9,770
Filling 410 6,360 570 8,840 *760 11,780
EL 2250
Discharging I 170 3,830 230 5,180 310 6,980
Discharging II 240 5,400 330 7,430 440 9,900
Discharging III 340 7,650 470 10,580 *630 14,180
Filling 410 9,230 570 12,830 *760 17,100
* max. speed 600 rpm
DRIVEN BY A PTO SHAFT 4-speed manual gearbox
Three gear reductions for discharging and one reverse gear for filling. The PTO shaft does not have to be reconnected for filling.
Pump types
[ selection ]
Hydraulic motor
[ orbital motor ]
[ ccm ]
Flow rate [ at 600 rpm ]
Pump pressure
[ bar ]
Oil quantity [ at 600 rpm ]
Oil pressure
[ bar ]
[ l / min ] [ m
3
/h] [ l / min ]
AN 40 80 233 14 6.0
55
130
AN 70 80 283 23 4.0 55 130
PL 200 100 1,080 65 5.0 60 160
PL 300 125 1,620 95 4.5 80 160
CL 390 200 2,340 140 5.0 125 160
CL 520 200 3,120 185 3.5 125 160
FL 776 160 5,080 305 2.3 100 200
FL 776 200 5,080 305 2.9 125 200
FL 1036 200 6,750 405 2.2 125 200
FL 1036 250 *5,580 *335 2.8 *130 200
FL 1036 210** 6,750 405 2.5 130 190
EL 1550 210** 9,170 550 2.2 130 230
EL 1550 240** 9,170 550 2.5 150 230
EL 2250 340** 12,080 725 2.5 210 220
* at 500 rpm ** with radial piston motor
DRIVEN BY A HYDRAULIC MOTOR
SIZES AND PERFORMANCE DATA
With our new light-weight pump, we achieve a weight reduction of up to
54 per cent compared to the pumps used before, while maintaining the
same flow rate. This allows our customers to obtain a higher maximum
load volume and saves energy.
WHEN EVERY GRAM COUNTS
THE NEW LIGHTWEIGHT PUMP
Tried and tested rotors
Use of the tried and tested
BLUEline rotors ensures a long
service life and lowest pulsation.
Maintenance-free timing gear
The rotors are synchronized by the timing
gear which offers the highest degree of
operational safety and a long service life.
Weight reduction of up to 54 %
Saves energy and provides higher
maximum load volume
Driven by a
central motor
The connection is estab-
lished by a hollow shaft.
Space-saving design
Reduction of installation
space of up to 23 %
FL1036
with 250 ccm
Hydraulic motor
185 kg
TOTAL WEIGHT
Pump types
[ selection ]
Hydraulic motor
(orbital motor)
[ ccm ]
Flow rate
Pump pressure
[ bar ]
Oil quantity
Oil pressure
[ bar ]
Weight (oil-filled)
incl. motor
[ kg ]
at 600 rpm
[ l / min ]
at 600 rpm
[ m
3
/h ]
at 600 rpm
[ l / min ]
FL 1036 200 6,750 405 2.2 125 200
184
FL 1036 250 *5,580 *335 2.8 *130 200
185
EL 1550 210** 9,170 550 2.2 130 230
296
EL 1550 240** 9,170 550 2.5 150 230
298
* at 500 rpm ** with radial piston motor
SIZES AND PERFORMANCE DATA
OF THE LIGHTWEIGHT PUMP
DRIVEN BY A HYDRAULIC MOTOR
Identical connection dimensions
Pipe connectors and the foot dimension
are identical to the previous series
EXCELLENCEMADE TO LAST
P20_11_2021
Börger GmbH | Benningsweg 24 | 46325 Borken-Weseke | Tel: +49 2862 9103-0 | info@boerger.com | www.boerger.com