Compact mobile pumps

EXCELLENCEMADE TO LAST
COMPACT
MOBILE PUMPS
5
2
3
3
4
1
BLUEline Nova
32
BÖRGER ROTARY LOBE PUMPS
THE VERSATILE MOBILE PUMP
Frequently, situations arise, in which a mobile pump is
required. Thanks to its compact design, the chemical re-
sistance and the self-priming operation, the Börger rotary
lobe pump is ideally suited for this application. Mobile
pumps are versatile and very often indispensable.
Each Börger rotary lobe pump is configured for its specific application using
a modular principle. This also applies to the mobile pumps. In this respect,
Börger delivers everything from a single source. The entire unit is designed
and manufactured for the corresponding application, including the mobile unit,
the pump technology and the control unit.
OPERATING PRINCIPLE
Rotary lobe pumps are self-priming, valveless, positive displacement pumps.
The synchronized rotation of the rotor pair creates a vacuum on the priming
side of the pump. This vacuum draws the liquid into the pump chamber. The
medium is pumped into the pressure area due to the rotation of the rotors.
If the direction of rotation is changed, the flow is reversed.
CONSTRUCTION
1
The quick-release cover
Access to all wetted parts by simply
loosening four ring nuts.
2
The rotors
Large selection of high-quality rotors
for almost pulsation-free pumping of
the medium.
3
The casing protection
Depending on its size, the BLUEline
pump is available with and comple-
tely without protection plates and
liners. When pumping abrasive media
containing solids, the protection
plates and liners protect the pump
casing from wear and can be repla-
ced in a matter of minutes.
4
Intermediate chamber and
shaft seal
The large-volume quench chamber
is oil-filled and ensures the highest
degree of safety. The ideal mechani-
cal seal is selected depending on the
medium.
5
The carrier and timing gear
The high-quality and maintenance-
free carrier and timing gear guaran-
tees a smooth and even operation
of the rotors. The result is a long
service life of the pump.
32
AT A GLANCE
+ Customized
+ Broad range of materials for all pump
components
+ With and without casing protection plates
and liners
+ Self-priming, pumping in slurp operation possible
+ Continuously adjustable, variable flow rate
+ Ease of maintenance with MIP
®
(Maintenance in Place)
+ Gentle pumping of shear-sensitive media
+ Resistant to solids
MOBILE PUMP UNITS
There are hardly any limits when designing a mobile pump.
Depending on the requirements, the mobile pump is constructed
as a hand cart pump, a portable pump, on a trailer, for transport
with a forklift truck or with a three-point mounting.
Hand cart pumps Portable pumps
On a truck or car trailer Transport with a forklift truck PTO pump
Series Flow rate in gpm Max. pressure
Min. Max. in psi
BLUEline Nova AN 0.1 155 145
ONIXline BJ 0.2 295 230
BLUEline Nova PN 0.3 340 175
BLUEline Nova QN 0.6 475 115
BLUEline Legend PL 0.5 500 115
ONIXline BL 0.5 590 230
BLUEline Legend CL 1.0 825 115
BLUEline Legend FL 1.5 1,805 175
BLUEline Legend EL 2.7 4,900 145
BLUEline Legend XL 4.6 6,335 145
54
EASY HANDLING
THE FLEXIBLE HAND CART PUMP
Hand cart pumps can be pushed very easily to different
application sites without any additional auxiliary means
and are ready for use right away.
Whether on two or four wheels, in ATEX- or TA Luft-compliant design, whether
with control technology or frequency converter – with the wide range of equip-
ment and additional parts, Börger is able to build hand cart pumps optimally
suited for almost any application.
CONSTRUCTION
1
The rotary lobe pump
The powerful rotary lobe pump is desi-
gned and manufactured individually to
suit your application.
2
Direct drive coupling
The electric motor is coupled directly to
the cylindrical pump shaft by means of
a hollow shaft.
3
The motor
The pump is driven by an electrical
parallel shaft helical gear motor. Upon
request, the motor can be equipped
with a frequency converter.
4
The chassis
The pump is installed on a chassis
made of stainless steel. Thanks to the
four solid-rubber tires the pump is very
easy to move. By slightly pressing down
the pushing device, the pump can be
steered very easily.
5
The crane lugs
The crane lugs facilitate easy loading
and unloading of the pump.
1
2
3
4
5
54
VERSATILE USE
• Emergency pump
• Replacement pump for pump maintenance
• Product filling operation
• Hazardous material pump
• Mining pump
• Technical center pump
• Removal of residues from tanks
• For emptying/filling tanker trucks
• Wine transfer pump
• For emptying IBCs, barrels, etc.
• and so on
+
With control technology
+
For changing pumped media
+
With liquid tank
+
Heated units
+
With filter and measuring
technologies
TAILORED SOLUTIONS
+
With electric motor
+
With combustion motor
+
ATEX-compliant
+
With additional macerator
AT A GLANCE
+ Customized
+ Chemically resistant
+ Easy handling
+ Perfectly matched components
+ Upon request, in ATEX- or API 676-
compliant design
+ Compact and powerful
+ Drive can be selected
76
2
1
3
4
FOR TERRAIN WHICH IS
DIFFICULT TO ACCESS
THE PORTABLE MOBILE PUMP
Börger has developed the portable mobile pump especially for
use in areas which are difficult to access. This solids-resistant
pump is designed such that the pump including the drive can be
carried to the corresponding area of application.
The portable pump is built in such a compact way that the pump including the drive can
be transported in the storage compartment of an emergency vehicle, on a truck bed or in
a car trunk. Despite its small size, the pump covers flow rate ranges of up to 30 m³/h.
Börger rotary lobe pumps are able to pump in slurp operation and are suitable for cleaning
up residual liquids or removing oil or similar substances from water surfaces.
CONSTRUCTION
1
The rotary lobe pump
The powerful rotary lobe pump is designed and manufac-
tured individually to suit your application.
2
The motor
The pump is driven by an electric or a combustion motor.
Upon request, the motor can be equipped with a frequen-
cy converter.
3
The handles
Using the hinged handles, the pump can be
carried very easily and conveniently.
4
The casters
Thanks to its casters the pump can be pushed
to the application site by one person.
3
76
FOR TERRAIN WHICH IS
DIFFICULT TO ACCESS
THE PORTABLE MOBILE PUMP
VERSATILE USE
• Oil spill response pump
• Hazardous material pump
• Skimmer pump
• Emergency pump
• Extinguishing foam pump
• Fire department pump
• Disaster relief pump
• For cleaning up and transferring
• Conveying of aggressive or highly viscous
liquids or media containing solids
• Use in potentially explosive atmospheres
• Conveying of flammable liquids
• and so on
+
With pressure monitoring
+
ATEX-compliant
+
Very compact design
+
Versatile use
+
Portable even with combustion
motor
TAILORED SOLUTIONS
+
Wth electrc motor
+
With combustion motor
+
Can be carried by two persons
+
Can be pushed by one person
AT A GLANCE
+ Chemically resistant
+ Easy handling
+ Compact, lightweight and powerful
+ Suitable for rough terrain
+ Upon request, in ATEX- or API 676-
compliant design
+ Also made of aluminum
+ Customized
+ Drive can be selected
EXCELLENCE – MADE TO LAST
www.boerger.com
P39_03_2022
Boerger LLC
Chanhassen, MN 55317, USA
Phone +1 612 435 7300
america
@boerger.com
HEADQUARTERS
Börger GmbH
Borken-Weseke, Germany
info
@boerger.de
Börger Benelux
Ootmarsum, Netherlands
info
@boerger-pumps.nl
Börger France Sarl
Wittersheim, France
info
@borger.fr
Boerger Polska Sp. z o.o.
Gliwice, Poland
info
@boerger.pl
Börger UK Ltd.
Staffordshire, United Kingdom
uk
@boerger.com
Boerger Pumps Asia Pte Ltd
Singapore
asia
@boerger.com
Boerger Pumps Asia Pte Ltd
Gurugram, Haryana, India
india
@boerger.com
Boerger Pumps (Shanghai) Co., Ltd.
Pudong, Shanghai, China
shanghai
@boerger.com
OOO Börger Pumps
Moscow, Russia
russia
@boerger.com
Headquarters